HHV 3-Mill – High productivity gains
The Modig HHV 3-Mill has been designed as a universal machining center for bar or extrusion components and is the ideal choice for a wide range of industries. The HHV 3-Mill has the capability to machine both Aluminum and Composite components in one single operation or setting.
The HHV 3-Mill was developed in close cooperation with the world’s largest aircraft manufacturer and from its introduction, quickly rose to become the first choice of leading aircraft producers. Whether for short runs of modified components or high-volume production, the HHV provides the perfect solution. Providing repeatability and a very fast production rate as the tooling required is of low cost and easily changeable. The benefit of making many small detail parts from the same stick of extrusion or bar is mainly reduced set-up time but also a significantly shortened cycle time for completed parts.
Tests made on bar stock materials by our HHV machine revealed reduced machining time per part of approximately 50% compared with standard three and four axis machining. At one of the world’s leading airplane builders, we measured a reduced processing time of 70%.
Unique depth of knowledge
Modig has been building profiling machines since 1988. Over the years, more than 30,000 drawings of machines and components have been analyzed and evaluated. This means that Modig has acquired a depth of knowledge and experience that is unique in the world. This is the knowledge that has been our source of guidance for the development of the HHV.
HHV 3-Mill – Universal Machining Center
Strengths of the machine:
- All extrusions within 6×10” cross section
- All bars within 5×5” cross section
- Seat tracks
- Floor beams
- Stringer clips/brackets
- Fuselage stringers
- Stowage bin structures
- Fuselage floor grid components
|Milling Spindle Max RPM||30,000|
|Spindle Taper||HSK-A63 DIN-69893|
|Spindle Power||42 kW (60 hp)|
|Travel X/Y/Z||1,500 mm (59.06″) / 420 mm (16.54″) / 260 mm (10.24″)|
|Travel U1/U2 Axis||900 mm (35.4″)|
|Rotary Chuck(s) Feed rates:||0 – 60 rpm|
|Rotary Chuck(s) Bore diameter||250 mm / 10″|
|Max. Extrusion Size (work piece)||150 mm x 250 mm (6″ x 10″)|
|Max. Bar Stock Size (workpiece)||127 mm x 127 mm (5″ x 5″)|
|Number of tools standard||24|
|Tool changing time||8 sec (chip to chip)|
|Feed Rates X/Y/Z/U||0 – 2,400 inch/min (0 – 60 m/min)|
|Feed Rates A1/A2/A3:||60 rpm/min|
|Floor space||40′ (12,0 m) x 15′ (4,0 m)|
|Weight, short bed, w/ (2) chucks:||7,000 kg (15,430 lb)|
Learn more – Right from the source!